Search

Connections

How do I connect my Smart remote control or Smart wall switch to my Smart products?

The Smart Remote Control and Smart Wall Switch can be paired with Smart lamps and Smart power plugs.

Make sure the lamps or plugs are turned on and receive a stable Wi-Fi signal. Only in this way can the devices be connected to the Remote Control or Wall Switch. Note: the Remote Control or Wall Switch itself is not visible in the app.

Pairing

  1. Ensure that the Smart device is already connected to the app.

  2. Turn the power of the Smart device off and on again (interrupt the power supply).

  3. Within 30 seconds, press the reset button of the Smart Remote Control or Smart Wall Switch and hold it down for 5 seconds until the indicator flashes.

  4. Wait until the Smart device starts flashing or switches off/on.

  5. Repeat steps 1 to 4 to pair more Smart devices.

Unpairing

  1. Press the ON button of the Smart Remote Control or Smart Wall Switch for 5 seconds until the indicator flashes.

  2. The Smart Remote Control or Smart Wall Switch is now unpaired.

Note:

  • If the Remote Control or Wall Switch is paired with multiple lamps or Smart plugs, all devices will be unpaired.

  • If you want to unpair only one lamp or Smart plug, make sure that the other lamps or plugs are completely switched off by interrupting the power supply.